Search results

  1. Wood Spinner

    Mexican Prescription Drugs

    Prior to medicare I bought a lot of my meds from canadadrug.com and found them to be the cheapest. They do require a copy of your Rx by fax or E-Mail. As there suppliers are all over the world they do tend to be a little slow in delivery for some things. One of my drugs is Venlafexamine and...
  2. Wood Spinner

    Any decent mechanics in Rocky Point?

    Also the mechanic behind Santa Fe market coming into town is very good and US trained good english. North end of Santa Fe Mkt. back 1 block and turn right. Big cream colored building.
  3. Wood Spinner

    Fishing getting better

    Hey Robert That little boat is a real thump. Takes some getting used to, kind of like riding a horse. I do need to make a method of getting the anchor rope to the bow instead of the side. I had a troly but it did not work well so I need to redesign and re install. I also was all over the...
  4. Wood Spinner

    Fishing getting better

    It was a little rough in the am but got fine by 2:30 I had headed West as I went out because the wind was from the West and I did not want to come back in rely slow if it got worse. Today Sat. it is flat and calm and the horizon is smooth so going East may be to the estuary.
  5. Wood Spinner

    Fishing getting better

    Out this am and did pretty good. I got out about 10:00 am and back in about 2:00. Fished off the South side of Pelican and brought in about 10 nice Rock Bass and 7 very nice Triggers. I started using some of the Needle fish I caught a couple of weeks ago and no luck. Finally a small rock bass...
  6. Wood Spinner

    New Stuff in Penasco

    I can not believe any one would pay $185.00
  7. Wood Spinner

    Got the jet ski wet and a little red this last weekend

    Thanks Stuart That is the plan but I am having a little problem with the GPS unit showing maps on my finder. I need to get back in the book and make sure what I am doing is correct. This time out the map was blank but I was showing signal aquired with bearings listed in the lower right corner...
  8. Wood Spinner

    Got the jet ski wet and a little red this last weekend

    The transducer is stern mounted as Kawasaki has no internal good location. It seemed to work just fine but as the water was rough I did not go much over 22 mph. I used one of the stern saver blocks and cut it to fit and epoxied it on. It is some kind of a plastic? that you can screw into. I...
  9. Wood Spinner

    Got the jet ski wet and a little red this last weekend

    Went out Friday and it was a little rough. Mostly learning hoe to drive the thing and what to expect. Way to much HP 160 Hp 900 # boat. but it was fun. I did fish a little dragging a Kastmaster with the pole in the holder behind me, first mistake. I looked back after a little while and the...
  10. Wood Spinner

    Deep Sea Fishing Recommendation

    Sure wish I had known a couple of days ago as we were down there and I could have checked with the guys at the fishing guy area on the way to the malechon. We will be going back down in two weeks and I will be happy to check things out.
  11. Wood Spinner

    Fishing Report - 09/21-22/2012

    I just can't wait. We will be going down tomorrow and at least if there are no fish I can learn about my jet ski. I have to learn how to get back on in deep water in case I just have to take a swim to cool off. I will be staying in close and fishing down to the estuary. There has to be...
  12. Wood Spinner

    Story on Rocky Point violence

    I find it very tough to think that any one who lives in Phoenix would consider Rocky Point more dangerous than their home. Just listen to the news or read the paper. Every day gun fights, home invasions, murder, rape, police officers in gun fights with the bad guys, bank and business robberies...
  13. Wood Spinner

    Got the jet ski done

    Like I said I plan on Edna monitoring from the 5th wheel. I plan on testing how to set up where each unit will be located. I am thinking the hand held may be better on shore and the bigger unit on the ski. May look a little wild with an antenna taller than the boat is long. What do you folks...
  14. Wood Spinner

    New world record yellowfin caught south of Cabo

    Sounds like a new boat to me!
  15. Wood Spinner

    Got the jet ski done

    Stuart True for all of life and everything we do. At sea or in the air does tend for things to become more significant for sure. I am moving my boat S to S radio into the RV so at least Edna can hear me if I am not to far out. I will carry a hand held. A big old whip may look a little strange...
  16. Wood Spinner

    Got the jet ski done

    The pipe is a pick up for use when I am driving. The top of it has a hose connection so I can attache it or a pump to the cooler. It does swivel and also can be pulled up out of the water. My concern is that it may cause turbulence for the transponder while I am underway and make the depth...
  17. Wood Spinner

    Something I cant under stand

    So What is current status on the bridge? Did they open the two lanes yet? If not is the Detour well marked ? I just hate backing up the 35 ft 5th wheel.
  18. Wood Spinner

    Got the jet ski done

    Fame is pvc for a trial run on design. I do anticipate some practice on re mounting in deep water. I am thinking about a strap with loops attached under the seat for both sides. Kenny Limitations are a real question here except I just read about a guy landing ?? a 650 lb marlin. I would...
  19. Wood Spinner

    Got the jet ski done

    Sorry for the dupes of pics. A little explanation # 2 Bait tank / fish box showing inlet from copper pick up or a pump. # 3 Transducer mounted to a stern saver block, thanks Nathan, also copper pick up tube for bait tank while running. # 5 Anchor trolley to put anchor rope to bow while...
  20. Wood Spinner

    Got the jet ski done

    WELL I FINALLY GOT IT DONE AND I AM READY TO GET OUT THERE FOR A TEST RUN. Plans are for to be down on 9-27 for the weekend and lots of water time if weather permits.
Top